Browse Categories
Browse by Manufacturer
Shopping Cart
Your cart is empty.
PRL Motorsports LLC
2012 - 2015 9th Gen Honda Civic Si Stage 2 Turbo System, RBC Intake Manifold
Fits 2012 - 2015 2.4L Civic Si
Item Number: PRL-HC9-TK-B

Out of Stock, 07/02/2021 ETA if Ordered Today
Optional RBC Intake Manifold
Optional RBC Intake Manifold Adapter Kit
Optional Fuel Injectors
Optional PNP Injector Clips
Optional Fuel Pump
Optional MAP Sensor
Optional Engine Management
Optional Clutch Upgrade
Optional Flywheel Upgrade
Optional Engine Mount Upgrade(s)

* denotes required field

Turbocharger Option:*
Click to Enlarge Image

Product Description

Fitment Notes:

      Please Read Before Ordering:


      Technical Notes:
      Our bolt-on 9th Gen Civic Si (2012, 2013, 2014 & 2015) turbo kit requires no cutting or modifying of the vehicle to install! Designed with simplicity and use of all factory components (including fog lights) in mind, we pride ourselves on easy installation, quality, efficiency and performance. There’s a reason customers and install shops all around the globe prefer PRL Motorsports turbo systems over competitors’.

      This kit offers the largest compatibility with the largest variety of turbochargers to suit a wide variety of power goals; compatible with all T3 frame turbochargers utilizing 4” compressor inlet (intake side), 2” or 2.5” compressor outlet (charge pipe side) and 2.5” (also known as 3” T3) V-Band turbine outlet. We have selected a handful of Garrett & Precision Engineering turbochargers that we feel offer the best power curve by default. Feel free to give us a call, though, if you wish to utilize another turbocharger choice!

      Performance Gains:

        Standard setups typically produce about 380 horsepower (DynoJet) on 93 octane and 13 psi and stock intake manifold. RBC intake manifold swapped cars typically produce about 430 (DynoJet) at the same boost levels. These numbers have been proven countless time on stock internal engines at over 100,000 miles. This kit was used to set the highest horsepower record at 930 horsepower and fastest quarter mile time touching well into the 9 second range!

          Kit Includes:

          • Billet steel T3 turbo manifold w/ 44mm / 46mm V-Band wastegate inlet flange (can be used with TiAL MV-R wastegate)
          • 304 stainless steel 3” downpipe w/ flex section (slotted 3-bolt flange fits stock and aftermarket exhaust systems)
          • 304 stainless steel dump tube w/ 44mm 46mm V-Band wastegate outlet flange (can be used with TiAL MV-R wastegate)
          • Precision Turbo & Engine PW46 46mm V-Band wastegate
          • 600 horsepower core divided end-tank intercooler (proven to over 900 horsepower)
          • Intercooler mount / bumper beam
          • 2.5" mandrel bent aluminum intercooler piping (powdercoated textured black)
          • TiAL Q 50mm Blow-off-Valve (BOV)
          • 4”intake pipe w/ MAF sensor bung (powdercoated textured black)
          • 4” Air Filter (oiled)
          • Breather filter (oiled)
          • 4-ply silicone couplers
          • 304 Stainless steel guided T-bolt clamps and liner worm gear hose clamps
          • Bag 1: Hot parts hardware
          • Bag 2: Mounting & intake air temp hardware
          • Bag 3: Oil feed line hardware
          • Bag 4: Oil drain line hardware
          • Bag 5: Vacuum line hardware
          • Heat wrap and gold reflective tape
          • Foam mounting piece

          Compatible Turbochargers:
          • Precision Turbo & Engine 5558, GEN2 5558, 5858, 5862, GEN2 5862, 6262, 6266, GEN2 6062, GEN2 6266, GEN2 6466, GEN2 6766, Garrett GT3071R, GT3076R, GT3082R, GT3582R, GTX2861R, GTX2971R, GTX2976R, GTX3071R, GTX3076R, GTX3576R, GTX3582R, GTX3071R GEN2, GTX3076R GEN2, GTX3576R GEN2, GTX3582R GEN2, GTW3476, GTW3684, GTW3884, Comp Turbo, Turbonetics Turbo and more!
          • S-Cover Compressor Cover (4.00" Inlet / 2.50" Outlet) or GT-E Compressor Cover (4.00" Inlet, 2.00" Outlet)
          • T3 Turbine Inlet / 2.50” (T31 3.00”) V-Band Outlet
          • .82 A/R Turbine Housing Recommended for Best Results!
          Precision turbochargers are available in journal bearing and ball bearing. Garrett GT and GTX turbochargers come standard with dual ball bearings. The GTX line features billet aluminum compressor wheels while the GT line features cast aluminum wheels. Billet aluminum compressor wheels are lighter than cast aluminum wheels which makes for faster spool and better top-end power. Turbochargers equipped with "GEN2" technology feature newer, more efficient compressor wheels and/or turbine wheels (depending on turbo) for more improved top-end power and spool.

          Intercooler Stencil Instructions:

          -Clean and make sure your intercooler is dry.
          -Place the cardboard stencil onto the front of the intercooler (Make sure the intercooler is not upside down, the PRL logo is on the driver's side end tank).
          -It is recommended to tape down the stencil to have a sharp logo and to avoid moving.
          -Mask off or cover the end tanks to avoid overspray.
          -Apply a high temp engine enamel style spray paint (we recommend Duplicolor DE1635 Ford SemiGloss Black, any color can be used).
          -Multiple coats may be needed to have full coverage, this varies per color.
          -Allow to dry 30-60 minutes before installing the intercooler.
          -If any mistakes are made such as runs/overspray acetone or paint thinner can be used to remove any unwanted paint or to remove the stencil entirely, though this will take some time.

          -Keep the stencil handy and in a safe spot without bending if you would like to refresh your intercooler after years of road debris blasting it! (Stop blowing holes in my ship!)

          Product Reviews

          (7 Ratings, 0 Reviews) Average Rating: