- FITS ALL 2018+ 2.0T HONDA ACCORD MODELS INCLUDING 6MT, RHD, INTERNATIONAL MODELS, ETC
- FITS FACTORY INTERCOOLER & PRL MOTORSPORTS INTERCOOLER UPGRADE
Please Read Before Ordering:
- DOES NOT REQUIRE TUNE
- Heat-soak reduction: Silicone hose offers extremely low thermal heat transfer properties, especially in comparison to steel or aluminum.
- Strength and rigidity: The rubber hoses used from the factory are known to experience expansion, which worsens as boost is increased. In time, the rubber construct weakens, causing increased likeliness of a boost leak. Also, we have managed to melt the factory rubber hose a handful of times during our track adventures on our shop car. Our high-temp, 4-ply silicone with handle the high temperatures of the turbocharger much better than the factory rubber hose(s).
- Smooth airflow: Custom molded silicone allows us to offer much higher flowing bends than we could with metal tubing.
- Optimal fitment: We have found that the factory rubbers hoses don't offer the most desirable fitment, especially when paired with an aftermarket radiator. Our silicone hose(s) offer even better fitment than factory.
Kits will come with all hardware needed for a seamless install.
- (1) Cold Side Charge Pipe w/ Machined Billet Aluminum Flange
- (1) Lower Cold Side Charge Pipe w/ Methanol Injection Bung
- (1) 1/8” NPT Pipe Plug (Pre-Installed in Methanol Injection Bung)
- (4) 4-Ply Silicone Coupler
- (8) 304 Stainless Steel Worm Clamp
- Increased efficiency & consistency in power delivery
Just finished installing these today. Install was easy. About 2 hours. Tight spots under the car on the cold side held me up, and removing the battery and battery box/tray was also a little time consuming. Otherwise everything was plug and play. Swapped out nice and the fitment, spot on. Running this with intercooler and P600.