Fits all variant models including RHD, International Models, Etc.
- Acura / Honda Part Number: 17220-6S9-A01
- Green Filter Part Number: 7462
- NO ECU CALIBRATION REQUIRED
Why use a PRL Motorsports air filter?
Decades of experience as enthusiasts and manufactures have been put together to create record-setting intake systems for track and street use. Our air filters are designed to last a lifetime with proper cleaning/maintaining (with biodegradable cleaner and synthetic oil). Lighten your wallet while helping the environment!
PRL Motorsports oiled filters utilize double-layer woven cotton with deep, dense pleats to increase the filtration surface by 10% - 15%, which promotes a greater volume of air into the combustion chamber while also maintaining superior filtration. This specially designed cotton filter traps particles as small as 5 microns! Each filter is encased with stainless steel mesh to resist dents and proved strength to ensure your PRL Motorsports air filter withstands the toughest of conditions!
Each filter is manufactured by using a four-step, low-pressure injection molding process to bond the rubber base to the interior components. This process virtually eliminates rubber seepage for maximum airflow and aesthetics, unlike other manufacturing methods which can block airflow up to 25%. Our flexible rubber base ensures a consistent, airtight seal, absorbs vibration and withstands millions of heat cycles.
Specially designed, lightweight filter lubricant is designed to be vehicle sensor-friendly and create a positive (+) magnetic charge, or ionic bond, with the filter’s stainless steel mesh. This positive charge attracts negatively (-) charged dust particles from entering the filter, causing them to stick to the stainless steel mesh, which allows the cotton to remain clear for maximum airflow.
Vehicle Manufacturer Warranty & Emissions Disclaimer:
Some items used and/or installed by PRL Motorsports may void portions of your vehicle's factory warranty. PRL Motorsports accepts no responsibility for compliance with vehicle's factory warranty.
Please note some PRL Motorsports products are designed for maximum effort performance applications. Manufacturers can't control the severity of off road terrain, driving habits, stress of high-performance, quality of installation, and offers no warranty of fitment or performance for a particular application. Some of our products require fabrication skills to install and all products should only be installed by a qualified fabricator or mechanic.
PRL Motorsports Limited Warranty:
PRL Motorsports warrants PRL branded products to the original retail purchaser that all parts/components manufactured by PRL Motorsports or sold under the PRL Motorsports brand, and directly purchased from PRL Motorsports or an Authorized PRL Motorsports Dealer honor a 12-month limited warranty from the date of purchase against manufacturing defects in the materials and craftsmanship. (Excludes other manufacturers' components that may be part of a product's assembly such as a turbocharger, blow-off valves, etc.) This Limited Warranty is void on all products found to have been used in racing or off-road applications, of any nature, whatsoever, and on all products that show evidence of abuse, lack of proper maintenance, improper installation, misapplication, alteration in any way whatsoever from PRL Motorsports original intent or design.
If a PRL Motorsports branded product covered by this warranty fails due to a manufacturing defect we will repair or replace the product, without charge, at our discretion. Only original, unaltered, unmodified materials and abnormal workmanship are covered by this policy.
Limited Warranty does NOT cover minor cosmetic inconsistencies due to the overall manufacturing process (such as, but not limited to, anodizing inconsistencies, rotomolding inconsistencies, mold parting lines, etc.). Damage caused by abuse, vehicle accident, improper care or installation, negligence, or the natural breakdown of colors and/or materials over extended periods of time and usage is not covered by warranty. This includes items that were in contact with fuel, oil, and other fluids, as well as items exposed to long time heat. Some fuel system hose lines or components are subject considered to be "Wear & Tear" items and are not covered by warranty. The use of thermal coatings, heat-wrap, insulation or any coverings not intended for use by PRL Motorsports is subject to warranty void. Damage not covered under warranty may be considered for repair for a reasonable rate or a reduced price for a replacement component. For information on this, refer to the "Wear & Tear" Section
PRL Motorsports branded turbocharger upgrades (P600) are subject to a 1-year/12,000 Mile Limited Warranty due to nature of high-power, maximum effort application and "Normal Wear & Tear." Excess boost, improper installation, improper/lack of ECU calibration and/or use other than our intended use is subject to warranty void.
Non-PRL Product Warranty:
Products sold by PRL Motorsports but not manufactured by PRL Motorsports are covered by and subject to warranty of the manufacturer. PRL Motorsports can help coordinate communication with the manufacturer and/or coordinate returns, exchanges or warranty claims of these products as per the terms of the manufacturer's polices.
Filing a Warranty Claim:
In the event a problem does occur with a PRL Motorsports component or product, please contact us at email@example.com or 724-325-6300 during business hours. We will need the following information for all Warranty Claims:
- Proof of purchase / receipt
- Current contact information (shipping address, phone number & email)
- Description of issue at hand
- Supporting evidence
- Install date / estimate of time installed
- Name of installer
All Warranty Claims must be initiated before returning or sending in any parts to PRL Motorsports. Warranty Claims will NOT be accepted on parts that have been modified in any way.
Upon request from your customer service representative, your product must be returned directly to the PRL Motorsports Warranty Department at:
1400 Randall Ct, Unit 104
Export, PA 15632
An RMA number will be provided to be clearly placed on the shipping label. The Dealer or Customer will ship the component back to PRL for inspection. Warranty is limited to replacement or repair of defective parts only and does not cover labor or shipping costs, vehicle down time or any other losses on your behalf. All shipping to Warranty must be pre-paid and insured. PRL Motorsports cannot be liable for lost or damaged in-bound packages.
If PRL Motorsports finds the product to be defective and within warranty period, PRL will repair, replace or issue credit to the customer at PRL's discretion. Any repaired or replaced product will be shipped via Ground shipping to the Dealer or Customer information provided during our initial Warranty Claims process. It is up to the Dealer/Customer to provide current and accurate information. Please note that no replacement warranty parts can be shipped until the original parts are returned to PRL Motorsports for inspection.
In the event that PRL does not ask for the damaged/defective part to be returned, we trust that the Dealer / Customer destroys or discards of this component.
Normal Wear & Tear:
Some products or components are subject to inevitable failure or wear with Normal Wear & Tear, and are not covered by our Limited Warranty. The chance or time of "normal" wear and tear failure may increase when products are operating outside of normality - i.e. high power, maximum effort, high heat, high use applications, old age, high ethanol content, high lead content, etc. PRL Motorsports reserves the right to deem products as "Normal Wear & Tear" for any reason.
Pair Your Part With: