Fits all 2016-2021 Civic 1.5T
Fits all variant models including Si, CVT 6MT, RHD, International Models, Etc.
The PTP Civic 1.5 Inlet Pipe Blanket is designed to limit the amount of heat that is transferred from your turbocharger to your inlet pipe that sits just above it. By limiting this amount of transferred heat, intake temperatures will be much cooler entering into your turbo.
Constructed with an outer layer made from pulverized volcanic lava rock (Rated 1800°F Direct Heat / 2500°F Radiant Heat) formed into fabric and woven into a tight mesh weave, these turbo blankets are internally insulated with high temperature calcium magnesium silicate wool (Rated 1832°F Continuous / 2300°F Peak) overlaid with a high temperature stainless steel mesh for increased durability and improved thermal resistance. The Lava Turbo Blankets are designed to withstand the harshest of conditions.
Every PTP Turbo Blanket is hand-crafted in North America, and quality is guaranteed. PTP Turbo Blankets is well known in the heat insulation industry for its high standards for material selection, design, and construction. Our materials are on the cutting edge of heat insulation technology. With the growing amount of imitation turbo blankets on the market, it's important to note many of them are manufactured using inferior materials for construction. Imitation turbo blankets can be ineffective, or worse, they can be dangerous if flammable materials are used.
With just this blanket the IAT and IAT2 temps were between 15-18F lower than without the blanket. Car is relatively new and under warranty so i didn't want to take the chance of something happening with the turbo blanket, so i went with this instead. Remember that the stock plastic inlet pipe sits above the turbo so under just regular driving it gets extremely hot, not to mention when going on a spirited drive. Air from the intake passes through there so you can imagine how hot it must get. If you’re rocking the stock inlet pipe and want colder air, then this just might be what you need.