What you have The RV6 R365 turbo has a power curve and characteristics of a ball bearing GTX2860 GEN 2 turbocharger. The test vehicle put down 345whp at 27.5psi on E30 before the factory MAP sensor and fuel system were maxed out. We tested several turbine and compressor wheel combinations and found this setup to be the most practical. It is able to max out the factory fuel system without running at inefficient boost levels which tend to shake turbochargers apart.
This turbo will require thicker 0W-30 or 5W-30. The reasoning is that running increased boost pressures on a small frame turbocharger puts significant load on the thrust bearing. The thicker oil will offer better protection for the engine and turbocharger at higher power levels.
Professional installation recommended.
Custom Tune required.
Inducer - 50.38mm
Exducer - 68mm
Blades - 10
Blades - 11
•Direct drop in design
•Optimized housings made from scratch
•Oversized journal bearing
•Oversized thrust bearing for high loads
•Light weight billet compressor wheel
•Inconel Alloy Turbine wheel
•Optimized FEA analysis design
•One year hassle free warranty