2016-2021 Honda Civic 1.5T Downpipe Gasket

2016-2021 Honda Civic 1.5T Downpipe Gasket

PRL Motorsports SKU: PRL-HC10-GAS-MID

$16.00 $16.99 Save $0.99

Shipping calculated at checkout

In Stock

 

Overview

Replacement gasket for our 2016-2021 Honda Civic 1.5L Turbo Downpipe. (May fit other manufacturers' 3" downpipes)
  • Located between downpipe and front pipe
  • 3" ID bore

Technical Notes:

  • KLINGER® Graphite Laminate SLS consists of expanded layers of graphite, which are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401. The adhesive layer is applied via a precisely controlled process, which makes it possible to keep the amount of adhesive below 1% of the amount of graphite in order to ensure uniform distribution of the adhesive.
  • Especially suitable for weak flanges at high temperatures up to 450°C.
  • The gasket material consists of expanded layers of graphite, which are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401. The adhesive layer is applied via a precisely controlled process, which makes it possible to keep the amount of adhesive below 1% of the amount of graphite in order to ensure uniform distribution of the adhesive.
  • Excellent chemical resistance
  • Excellent high temperature resistance
  • Provides excellent adaptability to any sealing surface
  • Seals irregular flanges
  • Conforms easily
  • Stable physical properties over the whole temperature range

Each gasket is stamped from KLINGER® GRAPHITE LAMINATE SLS, which offers excellent sealing properties for flanges throughout a wide variety of temperatures.

    Overall rating: 5.0 / 5 from 4 reviews.

    AI Generated Review Summary

    Summary topics

    Review topics: ["gasket"].

    Review highlights

    Reviews

    "Quality product. Unfortunate that I needed the gasket on top of the down pipe and not this one."

    ryan (5/5)

    "Good quality, shipped fast"

    Christopher (5/5)

    "Exactly what it says it is and fits great, thicker then other gaskets so it’s a little more durable"

    Raiden (5/5)

    Way better at sealing than a mls gasket.

    "I actually used this to seal a front pipe from 27won that only supplies a very thin mls gasket that has little to no crush. After being sent multiple replacements that didn’t solve the problem, this gasket was the solution."

    Nolan R. (5/5)

    Q&A

    Hi, would the torque specs for this gasket be the same as factory? 33 ft lb? This is a softer material and I don’t want to over tighten and blow out the gasket. Most graphite gaskets list 20ft lb. Thank you
    Yes we recommend torqueing to factory spec at 33ft/lbs.
    I have a down pipe and front pipe combo from RV6, Will this fit?
    Greetings. While our gasket kit is designed to fit PRL products, I cannot confirm if it'll fit the RV6.