"Needed to get more air flow and power out of the Raptor 3. 5 Ecoboost. This upgrade gave a quicker throttle response and the turbos flow much smoother throughout the rev band. Up top on highway speeds is the biggest gain in my opinion. Glad I made this purchase."
Overview
The PRL High Volume Intake System for the 2017–2025 Ford F-150 3.5L EcoBoost is designed to eliminate factory intake restrictions and feed your engine the airflow it demands. Featuring dual 4-inch roto-molded intake runners with integrated bell-mouth filters, this system ensures smooth and consistent airflow all the way to each turbocharger.
The oversized airbox nearly doubles the volume of the OEM unit, sealing to the hood for a direct cold air feed. With precision fitment and OEM-quality mounting, this is a bolt-on system built for real-world performance whether towing, hauling, or driving wide open.
Dyno testing on a 2018 3.5L EcoBoost F-150 showed consistent gains across the RPM range. On average, the PRL intake produced +8 horsepower and +12 lb-ft of torque at 4000 RPM, +8 horsepower and +8 lb-ft at 6000 RPM, and an impressive +22 horsepower and +17 lb-ft of torque at redline compared to stock. Peak improvements of +5.5 horsepower and +3.86 lb-ft were also recorded.
When paired with the PRL Intercooler, results climbed even higher: +50 horsepower and +40 lb-ft of torque at redline with power gains starting around 5300 RPM. The intake is designed not only for peak numbers but also to deliver consistent power throughout the rev range.
Key Features
-
Dual 4-inch intake runners feeding each turbo
-
High-flow cotton and steel mesh filters with bell-mouth inlets
-
Oversized roto-molded airbox that seals to the hood
-
Smooth-flowing curves with stepped silicone for efficient airflow
-
Direct bolt-on fitment with no cutting or trimming required
-
Filters mount directly to the airbox for easy servicing
-
Designed for top-end power without sacrificing drivability
Materials
-
Roto Molded HDPE Airbox and Intake Tubes
-
304 Stainless Aluminum Sheet Metal Components
-
5-Layer Reinforced Silicone Couplers
-
304 Stainless Steel Clamps
-
Anodized Aluminum Dress-Up Washers
-
Stainless Steel Hardware and Nylon Rivets
-
Rubber Gaskets and Grommets
Fitment
-
2017–2025 Ford F-150 3.5L EcoBoost
*Also Fits 2017-2025 Raptor Models
*Does Not Fit Power-boost Models
What’s Included
-
(2) PRL Intake Filters
-
(2) Roto-molded Intake Tubes (Driver/Passenger)
-
(4) Application-specific Silicone Couplers
-
(1) Roto-molded Airbox with Threaded Inserts
-
(1) Aluminum Filter Retainer
-
(2) Stainless Steel Brackets
-
(1) Rubber Grommet and Gasket
-
Full Hardware Pack (Clamps, Screws, Washers, Rivets)
*Planned submission to SEMA Garage for CARB testing
INSTALL GUIDE
Pair Your Part With:
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Overall rating: 5.0 / 5 from 3 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Great intake for a great price
"Shipping was fast. Installation was very easy and straightforward and looks like it was meant to come like that from the factory. I can feel a better throttle response at half throttle from before. Like always a great product from PRL."
2024 F150 Raptor
"Installed this on a 24’ Raptor, fitment was perfect, no issues at all. You will definitely notice some More power and torque with a slight increase in intake noise. Only downside to this system is servicing the filters. You either have to remove the entire airbox to get them out or pull both intake elbows. Other than, it’s a great fully sealed airbox with an outstanding price point."