- KLINGER® Graphite Laminate SLS consists of expanded layers of graphite, which are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401. The adhesive layer is applied via a precisely controlled process, which makes it possible to keep the amount of adhesive below 1% of the amount of graphite in order to ensure uniform distribution of the adhesive.
- Especially suitable for weak flanges at high temperatures up to 450°C.
- The gasket material consists of expanded layers of graphite, which are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401. The adhesive layer is applied via a precisely controlled process, which makes it possible to keep the amount of adhesive below 1% of the amount of graphite in order to ensure uniform distribution of the adhesive.
- Excellent chemical resistance
- Excellent high temperature resistance
- Provides excellent adaptability to any sealing surface
- Seals irregular flanges
- Conforms easily
- Stable physical properties over the whole temperature range
Each gasket is stamped from KLINGER® GRAPHITE LAMINATE SLS, which offers excellent sealing properties for flanges throughout a wide variety of temperatures.
- (1) Downpipe Gasket
- (1) Front Pipe Gasket
- (3) M10 x 1.25mm x 35mm Flange Bolt
- (3) M10 x 1.25mm Flange Nut
Vehicle Manufacturer Warranty & Emissions Disclaimer:
Some items used and/or installed by PRL Motorsports may void portions of your vehicle's factory warranty. PRL Motorsports accepts no responsibility for compliance with vehicle's factory warranty.
Please note some PRL Motorsports products are designed for maximum effort performance applications. Manufacturers can't control the severity of off road terrain, driving habits, stress of high-performance, quality of installation, and offers no warranty of fitment or performance for a particular application. Some of our products require fabrication skills to install and all products should only be installed by a qualified fabricator or mechanic.
PRL Motorsports Limited Warranty:
PRL Motorsports warrants PRL branded products to the original retail purchaser that all parts/components manufactured by PRL Motorsports or sold under the PRL Motorsports brand, and directly purchased from PRL Motorsports or an Authorized PRL Motorsports Dealer honor a 12-month limited warranty from the date of purchase against manufacturing defects in the materials and craftsmanship. (Excludes other manufacturers' components that may be part of a product's assembly such as a turbocharger, blow-off valves, etc.) This Limited Warranty is void on all products found to have been used in racing or off-road applications, of any nature, whatsoever, and on all products that show evidence of abuse, lack of proper maintenance, improper installation, misapplication, alteration in any way whatsoever from PRL Motorsports original intent or design.
If a PRL Motorsports branded product covered by this warranty fails due to a manufacturing defect we will repair or replace the product, without charge, at our discretion. Only original, unaltered, unmodified materials and abnormal workmanship are covered by this policy.
Limited Warranty does NOT cover minor cosmetic inconsistencies due to the overall manufacturing process (such as, but not limited to, anodizing inconsistencies, rotomolding inconsistencies, mold parting lines, etc.). Damage caused by abuse, vehicle accident, improper care or installation, negligence, or the natural breakdown of colors and/or materials over extended periods of time and usage is not covered by warranty. This includes items that were in contact with fuel, oil, and other fluids, as well as items exposed to long time heat. Some fuel system hose lines or components are subject considered to be "Wear & Tear" items and are not covered by warranty. The use of thermal coatings, heat-wrap, insulation or any coverings not intended for use by PRL Motorsports is subject to warranty void. Damage not covered under warranty may be considered for repair for a reasonable rate or a reduced price for a replacement component. For information on this, refer to the "Wear & Tear" Section
PRL Motorsports branded turbocharger upgrades (P600) are subject to a 1-year/12,000 Mile Limited Warranty due to nature of high-power, maximum effort application and "Normal Wear & Tear." Excess boost, improper installation, improper/lack of ECU calibration and/or use other than our intended use is subject to warranty void.
Non-PRL Product Warranty:
Products sold by PRL Motorsports but not manufactured by PRL Motorsports are covered by and subject to warranty of the manufacturer. PRL Motorsports can help coordinate communication with the manufacturer and/or coordinate returns, exchanges or warranty claims of these products as per the terms of the manufacturer's polices.
Filing a Warranty Claim:
In the event a problem does occur with a PRL Motorsports component or product, please contact us at email@example.com or 724-325-6300 during business hours. We will need the following information for all Warranty Claims:
- Proof of purchase / receipt
- Current contact information (shipping address, phone number & email)
- Description of issue at hand
- Supporting evidence
- Install date / estimate of time installed
- Name of installer
All Warranty Claims must be initiated before returning or sending in any parts to PRL Motorsports. Warranty Claims will NOT be accepted on parts that have been modified in any way.
Upon request from your customer service representative, your product must be returned directly to the PRL Motorsports Warranty Department at:
1400 Randall Ct, Unit 104
Export, PA 15632
An RMA number will be provided to be clearly placed on the shipping label. The Dealer or Customer will ship the component back to PRL for inspection. Warranty is limited to replacement or repair of defective parts only and does not cover labor or shipping costs, vehicle down time or any other losses on your behalf. All shipping to Warranty must be pre-paid and insured. PRL Motorsports cannot be liable for lost or damaged in-bound packages.
If PRL Motorsports finds the product to be defective and within warranty period, PRL will repair, replace or issue credit to the customer at PRL's discretion. Any repaired or replaced product will be shipped via Ground shipping to the Dealer or Customer information provided during our initial Warranty Claims process. It is up to the Dealer/Customer to provide current and accurate information. Please note that no replacement warranty parts can be shipped until the original parts are returned to PRL Motorsports for inspection.
In the event that PRL does not ask for the damaged/defective part to be returned, we trust that the Dealer / Customer destroys or discards of this component.
Normal Wear & Tear:
Some products or components are subject to inevitable failure or wear with Normal Wear & Tear, and are not covered by our Limited Warranty. The chance or time of "normal" wear and tear failure may increase when products are operating outside of normality - i.e. high power, maximum effort, high heat, high use applications, old age, high ethanol content, high lead content, etc. PRL Motorsports reserves the right to deem products as "Normal Wear & Tear" for any reason.
Pair Your Part With: